• Product Name : Transmission Equipment
  • Classification : Belt Conveyor with High Inclination Angle and Waved Guard Side
  • Belt Conveyor
  • Capacity: Belt Conveyor with High Inclination Angle and Waved Guard Side (13-794 m3/h)
    Belt Conveyor (78-2995 t/h)

【Introduction】: A belt conveyor with short distance and large inclination angle.

【Improvement】: The conveying belt with wave shaped guard side and transverse diaphragm, and the conveying obliquity is 0° -90°.

【Advantages】: Large lifting height Large conveying angle, small area taken, reduce equipment investment and construction cost In vertical layout, full closed setting, good sealing performance, little dust, good environmental protection It is widely used in coal, building materials, grain, chemical industry, electricity department, underground mining engineering, strip mining, huge automatic ship discharging etc.

【Product Structure】: Belt conveyor with high inclination angle and waved guard side is bonded with rubber waveform vertical “skirt” with free expansion. The skirt is bonded with transverse diaphragms with a certain intensity and elasticity, which makes the material convey in the bucket.

【Introduction】: A general stationary belt conveyor.

【Improvement】: Equipped backstop device Selections of electric drum, electric drum with external motor or electric reducer according to the working condition.

【Advantages】: Rubber or plastic bands with oil resistance, acid and alkali resistance are adopted for materials with special properties. The head of conveyor belt with vulcanized linkage prolongs the service life greatly. Stable conveying, no relative movement between materials and conveyer belt Large capacity, simple structure, convenient maintenance, low operation cost and wide application..

【Product Structure】: Belt conveyor is mainly composed of two end rollers and the closed belt which tightly set on it. The one driving the conveyor belt is named as the driving roller; the other one only used for changing the motion direction of the conveyor belt is named as the bend roller. The driving roller is drived by the motor through the reducer while the conveyor belt is dragged by the friction between the driving roller and the conveyor belt. The driving roller is generally installed on the discharging side to increase the traction and convenience to drug. Materials are fed by the feeding end, dropped on the conveyor belt, and discharged by the discharging end which is driven by the conveyor belt friction.