PRODUCT CENTER
  1. Home
  2. Product
  3. Crusher
  • Product Name : Crusher
  • Classification : Jaw Crusher
  • Hammer Crusher
  • Spring Cone Crusher
  • Hydraulic Cone Crusher
  • Capacity: Jaw Crusher (0.5~700t/h)
    Hammer Crusher (5~75t/h)
    Spring Cone Crusher (5~750t/h)

【Introduction】: Xinhai jaw types of crusher with high production capacity, large reduction ratio and high crushing efficiency.

【Improvement】: Xinhai improves the traditional specification of crushing chamber by adopting high speed swing jaw and cambered jaw plate.

【Advantages】: Advanced swing jaw assembly, more durable;
Suitable jaw crusher price ;
Large reduction ratio, optimum design of chamber and high crushing efficiency;
New cambered jaw increases the effective length of the jaw plate and brings lager capacity.

【Product Structure】: The motor transmits power through belt, drives the moving jaw do periodic motion to the fixed jaw surround the eccentric shaft. The angle between toggle plate and moving jaw increases when moving jaw moves up. So the moving jaw closes to the fixed jaw, and the stuff will be crushed in multiple ways. The angle of Jaw crusher between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw of jaw crusher moves away from fixed jaw by the pulling force of rod and spring, the products after crushing will be discharged from the outlet of Jaw crusher.

【Introduction】: Hammer crusher is a kind of equipment with high production capacity, large reduction ratio and high crushing efficiency.

【Improvement】: High-speed hammer impacts materials to crush materials. There are two ways of crushing (Wet and dry).

【Advantages】: Simple structure;
Large reduction ratio;
High production efficiency;
Suitable hammer crusher price ;
Variable hammer crusher specification.

【Product Structure】: Hammer Crusher is composed of rack, rotor, sieve bar, hammer, etc. Motor drives rotor through transmission belt, and materials are crushed due to the collision between hammer and materials produced by the rotation of rotor.

【Introduction】: Low power consumption and high production efficiency.

【Improvement】: The movable cone swings close to discharge opening of crushing cavity, which intersects an equal parallel strip between them to make end products granularity. Adopting dry oil and water sealing avoids the dust entering.

【Advantages】: Continuous rotation of the operated cone body and high productivity;
Easy to press, impact and crush and low power consumption;
Even particle size of products and uniformly surface wear of movable cone;
Simple structure: frame, horizontal axis, movable cone, balance wheel, eccentric bushing, upper crushing wall (fixed cone), down crushing wall (movable cone), fluid coupling, lubrication system, hydraulic system, control system, etc.
The movable cone swings close to discharge opening of crushing cavity, which intersects an equal parallel strip between them to make end products granularity. The feed opening is not large, which can deal with the primary crushed materials.
This kind of cone crusher adopts dry oil and water sealing avoiding dust entering and keeping clean.

【Product Structure】: The rotation of eccentric sleeve driven by motor makes cranking motions of movable eccentric cone and fixed cone, which achieves the purpose of crushing.

【Introduction】: Hydraulic cone crusher is a kind of crushing equipment.

【Improvement】: The supports at both ends of cone crusher main shaft, scientific design of crushing chamber, double insurance control of hydraulic and lubricating system.

【Advantages】 : The hydraulic cone crusher owns support at both ends of main shaft which can bear larger crushing force improving the crushing efficiency. Processing capacity is increased 35% ~ 60% than old type spring cone crusher.
Scientific design of crushing chamber and laminated crushing principle improve the cube proportion in end product and reduce the needle flake type stone. The particle size becomes more uniform.
Double safety control of hydraulic and lubricating system protects the hydraulic cone crusher from overload, and lubricates bearings better.

【Product Structure】: Hydraulic cone crusher consists of frame, transmission, hollow eccentric shaft, bowl-shaped bearing, crushing cone, springs and hydraulic pressure station for adjusting discharge opening. During operation, motor drives eccentric shaft shell to rotate through a horizontal axle and a pair of bevel gear. The axle of crushing cone swings with the force of eccentric shaft shell so that the surface of the crushing wall is close to the roll mortar wall from time to time. In this way, the ores and rocks will be pressed and crooked and crushed.